Titanium 6Al-4V Solution Treated & Aged (STA) Bar per AMS 4965

Titanium bar in the Solution Treated and Aged (STA) condition per AMS 4965 is one our specialties at Flight Metals.  Various applications for Titanium 6-4 STA include air frame components, high strength fasteners, and high performance automotive.   Titanium 6-4 Solution Treated and Aged condition per AMS 4965 is resistant to corrosion and has a excellent weight to strength ratio.  Inquiry today and we would be glad to assist with your requirement.

Composition:

Titanium AluminumVanadiumIron (max)Oxygen (max)Nitrogen (max)Hydrogen (max)YttriumOther Elements (Total) 
Balance5.5 – 6.75%3.5 – 4.5%0.30%0.20%0.05%0.0125%0.005%0.40%

Mechanical Properties:

Diameter or Least Distance between Parallel SidesTensile Strength (KSI)Yield Strength at .2% (KSI)Elongation in 2 Inches or 4D (L)Elongation in 2 Inches or 4D (T)Reduction of Area % (L)
Up to .500" (incl)16515510--20
Over .500" - 1.000" (incl)16015010--20
Over 1.000" - 1.500" (incl)15514510--20
Over 1.500" - 2.000" (incl)15014010--20
Over 2.000" - 3.000" (incl)14013010820
Over 3.000" - 4.000" (incl)1301208620

Also Known As:

Titanium 6-4 STA, Ti 6-4 STA, Titanium 6Al-4V Solution Treated and Aged

Available Forms:

Titanium Rect Bar     

Disclaimer:

This Data is for voluntary use only and as such is not to be relied upon in place of the full specification. Information could contain errors that company will not be held responsible.  In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. Please note the information stated above has no guarantee of accuracy or whether the datasheet is up to date.  The information provided in this datasheet has been drawn from various recognized sources, including AMS and ASTM Standards, recognized industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.